 English | (9-1773447-9) Raychem Tubing Products catalog | Versatile Raychem brand heat-shrinkable tubing products will cover just about all your needs.With high-performance tubing
from Tyco Electronics you can cover, protect, bundle, strain-relieve, seal, identify – and otherwise take care of – a broad range of projects.
Single wall tubing gives optimum flexibility and space savings along with mechanical protection and chemical resistance.
Dual wall tubing, with inner walls of adhesive or encapsulant, also reliably seals out moisture. Elastomeric tubing products are specifically designed for use in
applications where resistance to abrasion, chemicals and other fluids, and flexibility over a wide
range of temperatures is required. Heavy duty tubing products are intended for use in the most
rugged environments. The Altera family of medical-grade tubing products is specifically
designed to meet the needs of the medical device industry. Whether your application is
commercial, industrial, or military, there are Raychem brand tubing | 02 Apr 2009 | Catalog |  |
| English | -100 Material | -100 Low-fire-hazard material | 20 Sep 2006 | Datasheet | |
| English | -100S Low-fire-hazard screened material | -100S Low-fire-hazard screened material | 20 Sep 2006 | Datasheet | |
| 101A011 to 094 | End caps | 04 Aug 2005 | Datasheet | |
| English | -12 Modified fluoroelastomer | -12 Modified fluoroelastomer | 20 Sep 2006 | Datasheet | |
| English | -125 Flexible fluoropolymer | -125 Flexible fluoropolymer | 20 Sep 2006 | Datasheet | |
| 202A111 to 196 Straight boot | 202A111 to 196 Straight boot | 20 Sep 2006 | Datasheet | |
| 202C611 to 663 Uniboot | 202C611 to 663 Uniboot | 20 Sep 2006 | Datasheet | |
| 202D121 to 196 Straight, lipped boot | 202D121 to 196 Straight, lipped boot | 20 Sep 2006 | Datasheet | |
| 202D211 to 299 Straight, lipped boot | 202D211 to 299 Straight, lipped boot | 20 Sep 2006 | Datasheet | |
| 202D921 to 963 Straight, lipped boot | 202D921 to 963 Straight, lipped boot | 20 Sep 2006 | Datasheet | |
| 202F211 to 274 | Straight, lipped boot for use in conjunction with Raychem adapters to provide strain relief for harness systems using circular connectors. Boot is compati-ble
with all Raychem grooved adapters of
the appropriate shell size. | 01 Jun 2006 | Datasheet | |
| 202G211 to 253 | 202G211 to 253 | 04 Aug 2005 | Datasheet | |
| 202G611 to 653 | 202G611 to 653 | 04 Aug 2005 | Datasheet | |
| 202K121 to 185 | Straight, lipped boot for use in conjunction with Raychem adapters to provide strain relief for harness systems using circular connectors.
Boot is compatible with all Raychem grooved adapters of the appropriate shell size. | 01 Jun 2006 | Datasheet | |
| English | 202W302 to 342 Bobbin | Heat Shrink Bobbins | 05 Feb 2007 | Datasheet | |
| 207W213 to 256 | Two-part feedthrough for strain relief and abrasion protection when cables pass
through equipment boxes or panels. | 01 Jun 2006 | Datasheet | |
| 214A011 to 052 | D-subminiature, straight boot Provides strain relief and mechanical protection on D-subminiature connector terminations. | 04 Aug 2005 | Datasheet | |
| 214A311 to 352 | D-subminiature, straight boot Provides strain relief and mechanical protection on D-subminiature connector terminations. | 04 Aug 2005 | Datasheet | |
| English | 214P009 to 037 | D-subminiature, straight boot with jack screws Provides strain relief and mechanical protection on D-subminiature connector terminations. | 04 Aug 2005 | Datasheet | |
| 222A111 to 196 | Right-angled boot for mechanical protection and connector-cable strain relief. This family of boots has no lip, so a boot can be installed directly onto the connector accessory thread. | 04 Aug 2005 | Datasheet | |
| 222D121 to 196 | 222D121 to 196 | 04 Aug 2005 | Datasheet | |
| 222D211 to 299 | Right-angled, lipped boot Provides strain relief and mechanical protection between cable and connector. Boot is usually used on open-wire-bundle-airborne harnesses, or applications where
the long tail replaces cable jacketing removed during termination. | 04 Aug 2005 | Datasheet | |
| 222D921 to 963 | Right-angled, lipped boot Provides strain relief and mechanical protection between cable and connector. It is used in applications where only a
small number of the available contacts are utilized, resulting in a high ratio between the adapter and cable d | 04 Aug 2005 | Datasheet | |
| 222F211 to 285 | Right-angled, lipped boot for use in conjunction with Raychem adapters to provide strain relief for harness systems using circular connectors. Boot is compatible with all Raychem grooved
adapters of the appropriate shell size. | 04 Aug 2005 | Datasheet | |
